Login

CONVERGE Pro 2 128SRD

An ideal platform for sound reinforcement and networked audio distribution

The CONVERGE Pro 2 128SRD has ClearOne provides Sound Reinforcement and Dante based Audio Distribution.

Audio distribution is based on Dante digital networking technology, which increases the scalability and interoperability with any Dante based devices.

Key Highlights

  • Built-in Dante for networked audio
  • Acoustic Intelligence for rich audio
  • DARE® feedback elimination
  • Advanced microphone gating
  • 12 mic/line-inputs and 8-line outputs
  • USB audio support
  • Stack up units to 144 Mic/line inputs
  • Daisy-chain with all ClearOne P-link devices such USB expander and GPIO expander
  • Daisy-chain with Dialog 20 Wireless Microphone System
  • New CONSOLE® software for discovery, configuration and control
  • Third-party control modules
  • Two power options- P-Link and POE

Applications

  • Sound reinforcement
  • Dante audio networking

Environments

  • Convention centers
  • Transportation hubs
  • House of Worship
  • Training rooms
  • Lecture halls
  • Auditoriums
  • Courtrooms

The CONVERGE Pro 2 128SRD has ClearOne provides Sound Reinforcement and Dante based Audio Distribution.

Audio distribution is based on Dante digital networking technology, which increases the scalability and interoperability with any Dante based devices.

MIC/LINE INPUTS & OUTPUTS

  • Inputs: Balanced audio inputs, 3.81mm Orange color Phoenix/Euroblock type male header, Push-on mini-terminal block
  • Outputs: Balanced audio outputs, 3.81mm Black color Phoenix/Euroblock type male header, Push-on mini-terminal block
  • Frequency Response: 20Hz – 22kHz @ +4dBu, +/- 0.5dBu
  • EIN (Equivalent Input Noise): 20kHz BW, max gain, Rs = 150Ω, -126dBu
  • THD + N (Total Harmonic Distortion + Noise):
  • - 20Hz – 22kHz @ +4dBu, line level, 0.006%
  • - 20Hz – 22kHz @ -56dBu, mic level, <0.04%
  • Dynamic Range: 20Hz – 20kHz @ 0dB, >105dB
  • Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
  • Input Impedance: Balanced (line to ground), 2.2kΩ, 1%
  • Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
  • Maximum Input Level: -65dBu to 20dBu
  • Phantom Power: 48V, Impedance 6.81kΩ
  • Output Impedance: Balanced (line to ground), 95Ω, 1%
  • Output Level: 0dBu (Nominal), 20dBu (Max), -40dBu (Selectable)

ETHERNET

  • ort Type: RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
  • IP address: IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)

DANTE™ AUDIO

  • Port Type: RJ-45 Gigabit Ethernet connectors for Primary and Secondary Ports
  • Audio: Digital Audio, 16 x 16 bidirectional channels
  • Sample Rate: 48kHz / 96kHz
  • Sample Bit Depth: 24-Bit

C-LINK EXPANSION BUS

  • Ports Type: RJ-45 (Cat5e or Cat6)
  • C-Link In & Out: Proprietary Expansion Bus
  • Audio: 64 Expansion channels
  • Cable: Solid core, factory terminated Cat 5e or 6 cable
  • Distance: Up to 150’ (45M

P-LINK PERIPHERAL BUS

  • Ports Type: RJ-45 (Cat5e or Cat6)
  • P-Link In & Out: Proprietary Peripheral Bus
  • PoE In:
  • - P-Link In Port
  • - PoE IEEE802.3AF
  • Audio: Up to 3 Beamforming Microphone Array 2 units + DIALOG 20 Wireless Receiver unit
  • Cable: Solid core, factory terminated Cat 5e or 6 cable
  • Distance: Up to 200’ (60M)

RS232

  • Port Type: DB9 Female
  • Settings: 9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
  • Support: Serial commands

GPIO

  • Port Type: 5.08mm Green color Phoenix/Euroblock type male header
  • Support: Control, Status, Variable Voltage Control
  • Power Pin: 5V DC @ 350mA Power Source
  • Pin 1 to 4:
  • - Open Collector Outputs: 40VDC @ 250mA
  • - Active Outputs (Source/Sink): 5VDC @25mA
  • - Logic Inputs: 40.2kΩ pull up
  • - Variable Voltage Control Inputs: 5VDC max
  • Ground Pin: GND

USB CONTROL

  • Port Type: USB-B connector
  • Location: Front Panel
  • Compatible: USB 2.0 & USB 3.0

LEDs

  • Location: Front Panel
  • Status LED
  • - Off: Unit still initializing
  • - Blue - Fast Blinking: Stack Syncing in progress
  • - Blue - Slow Blinking: Unit not configured
  • - Blue - Solid: Configured unit
  • - Red - Fast Blinking: Stack Sync error
  • Locate LED: Blue - Blinking: Unit “Locate” command received
  • Power LED: Blue - Solid: Unit is powered on

TOUCH SENSOR

  • Sensor Type: Capacitive Touch Button
  • Location: Front Panel

POWER & THERMAL

  • Port Type: AC Inlet
  • Mains Voltage: 100-240V AC, 50/60Hz
  • Power Consumption: 50 Watts Typical
  • Thermal: 170 BTU/Hr Typical
  • Operating Temperature: 14°F (-10°C) to 104°F (40°C) Ambient Temperature

DIMENSION & WEIGHT

  • RU size: 1 RU
  • Width x Depth x Height:
  • - Without rack-ears: 17”W x 10.73”D x 1.72”H (43.2cmW x 27.3cmD x 4.4cmH)
  • - With rack-ears: 19”W x 10.73”D x 1.72”H (48.3cmW x 27.3cmD x 4.4cmH)
  • Unit Weight: 9.3 lbs (4.2 kg) (Approximately)
  • Shipping Weight: 13.8 lbs (6.3 kg) (Approximately)

PACKAGE

  • Power Cord: 6’ (1.8M), Grounded, Qty 1
  • Input Connectors: Terminal Block Connector, 3 Position (Orange), Qty 12
  • Output Connectors: Terminal Block Connector, 3 Position (Black), Qty 8
  • GPIO Connector: Terminal Block Connector, 6 Position (Green), Qty 1
  • C-Link Cable: RJ-45 To RJ-45 Cable, 18” (45.7cm), Qty 1
  • USB Cable: USB Type A to Type B, 6’ (1.8M), Qty 1
  • Rack Ears: Pre-installed, Qty 2
  • Screw/Washer Kit: Rack Decor, Qty 4

PART NUMBERS

  • 910-3200-001 : CONVERGE Pro 2 128
  • 910-3200-001-D : CONVERGE Pro 2 128D
  • 910-3200-002 : CONVERGE Pro 2 128T
  • 910-3200-002-D : CONVERGE Pro 2 128TD
  • 910-3200-003 : CONVERGE Pro 2 128V
  • 910-3200-003-D : CONVERGE Pro 2 128VD
  • 910-3200-005 : CONVERGE Pro 2 48T
  • 910-3200-006 : CONVERGE Pro 2 48V
  • 910-3200-004 : CONVERGE Pro 2 120
  • 910-3200-007 : CONVERGE Pro 2 012
  • 910-3200-101 : CONVERGE Pro 2 128SR
  • 910-3200-101-D : CONVERGE Pro 2 128SRD

Resource Library

Ready for a deeper dive?