AWARDS
Successful BMA 360 Deployments
- The industry's only ultra wideband, frequency invariant beamforming mic array with uniform gain response across all frequency bands.
- FiBeam™ technology gives users the ultimate in natural and full fidelity audio across all beams and within a single beam.
- Deep Sidelobe Beamforming, DsBeam™, provides unparalleled sidelobe depth, below -40 dB, resulting in superior rejection of reverb and noise in difficult spaces for superb audio clarity and intelligibility.
- With 6G Acoustic Echo Cancellation (AEC) and FiBeam™ technology, conference participants experience natural and full-fidelity audio across all beams and within a single beam.
- A dramatically new approach to precision beamforming provides a new beam topology to easily achieve distortion-free, full 360-degree coverage of any room shape and any seating arrangement using ClearOne Audio Intelligence™.
- The BMA 360 Voice Lift feature provides a powerful and simple way to drive multiple mix-minus speaker zones allowing everyone in the conference room to hear every word.
- Voice Lift provides a powerful and simple way to drive multiple mix-minus speaker zones allowing everyone in the room to hear every word.
- Due to the exceptional performance of the breakthrough technologies, FiBeamTM and DsBeamTM, greater Voice Lift gains can be realized that have not been previously possible.
- The combination of ClearOne’s beamforming and feedback cancellation technologies provide up to a 20 dB boost in gain before feedback compared to an omni mic.
- Further advancements in adaptive steering (think of it as smart switching) provide impeccable coverage of each conference participant as well as simultaneous support for camera tracking and Voice Lift.
- 6G Acoustic Echo Cancellation (AEC) delivers unparalleled per-beam full-duplex audio performance. On-board audio algorithms, like noise reduction, filtering, and Automatic Level Control, eliminate the need for per-beam processing in a DSP mixer - requiring fewer DSP mixer resources.
- Built-in, robust power amplifiers, configurable as 4 x 15 Watt or 2 x 30 Watt, provide flexibility for driving loudspeakers.
- ClearOne’s breakthrough technologies, FiBeamTM, DsBeamTM, Voice Lift, and 6G AEC combine to create VividVoice™, a significant advancement for professional conferencing.
- Integrated features significantly reduce system design complexity, simplify installation, consume less rack space, and lower system cost.
- Daisy-chain up to three ceiling tiles via P-Link for divisible rooms or larger conference setups – for simpler wiring and longer distances compared to networked “home run” connections via Ethernet.
- Single workflow for configuration using CONSOLE® AI software. Competing products require practitioners to program multiple components using different toolsets: Ethernet switches, Ceiling Tiles, DSP mixers, and the Dante Controller.
- Supports three different ceiling grid types: 24 in, 600 mm, and 625 mm. It incorporates a VESA-mount hole pattern that supports pole mounting. Hard-ceiling mount adapter kits are also available..
BEAMFORMING FEATURES
- True Frequency Invariant Beamformer: Gain Response is unvarying across frequency
- Beam widths: 35°, 45° and 55° with Frequency Invariance
- Beamforming Range: 100 Hz to 20 KHz
- Deep Sidelobes down to 45 dB of Depth
- Beam Pointing Accuracy of 0.2 dB
- Dynamic Range: 20 Hz to 20 KHz, > 70 dB
- Sampling Rate: 48 kHz
- Signal-to-noise ratio: 69 dBA
- Microphone element quantity: 121
- Max. SPL: 96 dBSPL
- Equivalent noise level (dB): 25 dBSPL
- Number of Beams: 6, 8, 10, 11, or 12
- Room Patterns: Full Circle/Square, Rectangular, Semi-Circle/Classroom
- Coverage Sizes: Customizable coverage patterns starting at 5 ft x 5 ft (25 sq ft area) circular coverage at a mounting height of 7 ft to a maximum coverage of 64 ft x 64 ft (4096 sq ft area) circular coverage at a mounting height of 20 ft
NOTE: The performance of the coverage is affected by room acoustics, construction, materials, and noise levels. - Ceiling Height: Configurable with CONSOLE AI from 7 ft to 20 ft
AMPLIFIER OUTPUT
- Type: 5.08mm Black Header, Phoenix type Euroblock
- Audio: 4 channels
- Output Power: 4x15W Max, 8 Ω load, or 2x30W, 4Ω load, bridged
- 2x30W, 4Ω load, parallel bridge-tied load
- Frequency Response: 20Hz – 22kHz, +/- 0.5dB
CONFIGURATION
- Acoustic Echo Cancellation (AEC) on/off
- Noise Cancellation (NC) on/off
- Automatic Level Control (ALC) on/off
- Automatic Gain Control (AGC)
- Gain adjust
- Mute on/off
SOFTWARE
- CONSOLE® AI
DIMENSION & WEIGHT
- 24-in BMA CT (WxDxH): 23.72 x 23.72 x 2.13" (602.5 x 602.5 x 54.1mm)
- 600mm BMA CT (WxDxH): 592.5 x 592.5 x 54.1mm (23.33 x 23.33 x 2.13")
- Product Weight: 9lb (4.1kg)
- Shipping Weight: 12.85lb (5.83kg)
MOUNTING
- Ceiling mount (24 in or 600 mm drop-ceiling grid)
- VESA©-mount ready, 100mm hole pattern, M4x10mm
P-LINK PERIPHERAL BUS
- Ports Type: RJ-45
- P-Link In & Out: Proprietary Peripheral Bus
- P-Link Power
- 56V 36W IEEE 802.3at compliant devices or equivalent, Mode B
- Cable: Solid core 24AWG, factory terminated Cat6
- Distance
- Normal distance mode: Up to 200 ft (60 m)
- Long distance mode: To be supported with a future
firmware upgrade.
PoE ++ PORT
- Port Type: RJ45 PoE power
- Power on all pairs
- 56V 90W IEEE 802.3bt Compliant Devices or equivalent, Mode A and B, Midspan
- Cable: solid core, 23AWG, factory terminated Cat6
PoE REQUIREMENTS
- No speakers: 36W PoE, connected via P-Link or PoE++
- Speakers: Requires 56V 90W IEEE 802.3bt PoE, must be via direct PoE++ port on the BMA 360
POWER SELECTION
-
Automatically senses and switches to whichever input port has PoE power
POWER AND THERMAL
- Power Source: PoE injector or equivalent
- Power Consumption:
- 100-240VAC, 50/60 Hz
- 23 Watt typical without speaker amp
- 55W at 1/3 power x 4 @ 1kHz
- Thermal: 270 BTU/hr at max power
- Operating Temperature: 14°F/-10°C to 104°F/40°C ambient temperature
ACCESSORIES
- 910-3200-202 PoE Power supply kit, 36W*
- 910-3200-207 70 Watt PoE power injector kit
- 910-3200-209 PoE Power supply kit, 90W*
- 910-3200-205-AI Brackets, convert 600 to 625mm
- 910-3200-208-CB BMA CT Conduit Box
MOUNTS FOR NON-TILE CEILINGS
- 910-3200-210 BMA 360 Surface-Mount Kit 24in
- 910-3200-210-I BMA 360 Surface-Mount Kit 600mm
- 910-3200-212 BMA 360 Recessed-Mount Kit 24in
- 910-3200-212-I BMA 360 Recessed-Mount Kit 600mm
PART NUMBERS
- 910-3200-208-U BMA 360
- 910-3200-208-I BMA 360 INTERNATIONAL
COMPATIBLE WITH
