AWARDS
- Great room solution for BYOD collaboration using any cloud-based collaboration service such as Microsoft® Teams, WebEx™, Zoom™, and more.
- Configure using CONSOLE® AI software’s enhanced visualization and audio intelligence.
- BMA CT with built-in AEC, provides the same impeccable room coverage using adaptive steering (think of it as smart switching).
- Now, configure Versa Pro CT directly through the USB port, or use network Ethernet jack.
- Includes mic/line inputs with AEC, line outputs, 4x10 Watt power amps, USB audio, mobile phone jack, and HDMI.
- Monitor, control, and audit Versa Pro CT with CONVERGENCE™ unified AV network management software.
- Comes preloaded with a project file ready for the most common room configuration.
- With a rich mix of video and audio options, the Versa Pro CT is versatile, flexible, and easy to install.
- There is no system in the market today that can compete with the Versa Pro CT on price, features, coverage, and quality.
- Add ClearOne’s Wall-Mount Bluetooth Expander and UNITE® cameras to complete your collaboration system.
INCLUDES
- CHOICE OF BMA CT
- BMA CT 24in
- BMA CT 600mm
- CONVERGE® Huddle CT
- PoE Injector Kit
NOTE: See Component Datasheets for Full Specs
BMA CT
24 MICROPHONES
- Number of Beams: Two patterns, either 5 or 6 beams
- Polar Pattern: Custom
- Frequency Response: 150Hz – 16kHz, +/- 3dB
- Dynamic Range: 150Hz – 16kHz, > 70dB
AMPLIFIER OUTPUT
- Type: 5.08mm Black Header, Male, Phoenix type Euroblock
- Audio: 2 channels
- Output Power: 2x10W Max, 8Ω load*
- Frequency Response: 20Hz – 22kHz @ +10dBu, +/ 0.5dB
- THD + Noise: 20Hz – 22kHz @ +10dBu, 1W, < 0.2%
- Dynamic Range: 20Hz – 22kHz @ +20dB, > 102dB, with 20kHz digital low pass filter
- Crosstalk: Channel to Channel, stimulus at +20dBu receptor 10W output 8Ω load, 20Hz – 22kHz,< -60dB
LED
- 4 LED indicators on one end of unit:
- Mute/Un-mute configuration with 8 color options, two blink patterns and warning indications
CONFIGURATION
- Beam enable/disable
- Acoustic Echo Cancellation (AEC) on/off
- Noise Cancellation (NC) on/off
- Filters: All Pass, Low Pass, High Pass, Notch, PEQ
- Automatic Level Control (ALC) on/off
- Gain adjust
- Mute on/off
- Auto gate/Manual gate
P-LINK PERIPHERAL BUS
- Ports labeled as “Expander” on Huddle Chassis, and “P-Link” on BMA CT
- P-Link In & Out: Proprietary Network
- Ports Type: RJ-45
- Cable: RJ45 Cat5e, Cat6, Expandable
- Distance: Up to 200 ft.
POWER SELECTION SWITCH
- Type: Slide Switch
- Slide toward P-Link to power device by P-Link
- Slide toward PoE to power device by PoE Injector
CONFIGURATION & ADMINISTRATION SOFTWARE
- CONSOLE® AI Software
MOUNTING
- Ceiling mount (24” or 600mm drop-ceiling grid)
POWER & THERMAL
- Power Type: PoE
- Port Type: RJ-45
- Power Source: PoE Injector or equivalent
- PoE: IEEE 802.3at compliant devices providing 56V and 640 mA (36 W).
- P-Link In - Mode B
- PoE In - Mode A and Mode B
- *BMA CT requires its own PoE (IEEE 802.3 at compliant) if 2x10W speakers are driven
- Power Consumption:
- 100-240VAC, 50/60Hz
- 9.1 Watt typical without speaker amp
- 38W at max power 1kHz (2 x 10W)
- Thermal: 130 BTU/Hr at max power
- Operating Temperature: 14° F/-10° C to 104° F/40° C ambient temperature
DIMENSIONS
- 24” BMA CT
- 23.72 x 23.72 x 2.13” (602.5 x 602.5 x 54.1mm)
- 600 mm BMA CT:
- 23.33 x 23.33 x 2.13” (592.5 x 592.5 x 54.1 mm)
WEIGHT
- BMA CT - 7.7lbs (3.5kg)
CONVERGE HUDDLE CT
INPUTS
- 3 channel balanced audio mic/line inputs with AEC
- 1 channel balanced audio line input without AEC
- 3.81mm orange-color Phoenix/Euroblock type male header, push-on mini-terminal block
LINE OUTPUTS
- 2-channel balanced audio line outputs, 3.81mm black-color Phoenix/Euroblock type male header, push-on mini-terminal block
- 1 USB 3.0 Type-B
- 1 USB 3.0 Type-A
- RJ-45, 10/100/1000Mbps, passthrough to USB-B 3.0
AMPLIFIER OUTPUT
- Type: 5.08mm Black Header, Male, Phoenix type Euroblock
- Speaker Output Port: Dual binding posts
- Audio: 2 Channels
- Output Power: 10W Max, 8Ω load
- Frequency Response: 20Hz – 22kHz @ 10dBu, +/- 0.5dBu
- THD + N (Total Harmonic Distortion + Noise):
- 20Hz – 22kHz @ 10dBu, 1W, <0.3%
- Dynamic Range: 20Hz – 22kHz @ 20dB, >102dB with 20kHz digital low pass filter
- Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor, < -70dB
DIMENSIONS
- CONVERGE HUDDLE
- 7.52” x 7.83” x 1.73” (191mm x 199mm x 44mm)
WEIGHT
- CONVERGE HUDDLE - 2.9 lbs (1.32 kg) approx.
POWER OVER ETHERNET (PoE) REQUIREMENTS
- If no built-in amps used on either the Huddle DSP or BMA CT, only 1 PoE+power supply is required for all 3 devices.
- If built-in amps on Huddle DSP and/or BMA CT are used, two PoE+power supply units will be required; one for the Huddle DSP, one for the BMA CT.
- No additional PoE+power supplies are required for use of the Bluetooth Expander
BMA CT MOUNTS FOR NON-TILE CEILINGS
- 910-3200-210 BMA Surface-Mount Kits 24in
- 910-3200-210-I BMA Surface-Mount Kits 600mm
- 910-3200-212 BMA Recessed-Mount Kits 24in
- 910-3200-212-I BMA Recessed-Mount Kits 600mm
PART NUMBERS
930-3200-206-U - COLLABORATE Versa Pro CT
INCLUDES
- 910-3200-206-U BMA CT 24in
- 910-3200-701 CONVERGE® Huddle CT
- 910-3200-202 PoE power supply kit
PART NUMBERS
930-3200-010-I - COLLABORATE Versa Pro CT Intl
INCLUDES
- 930-3200-206-I BMA CT 600mm
- 910-3200-701 CONVERGE® Huddle CT
- 910-3200-202 PoE power supply kit
COMPATIBLE WITH
